Not logged in
Shopping cart    View Cart (0)
Search Products
RSV-1 REDUNDANT SUPPLY VALVE
1 of 6
RSV-1 REDUNDANT SUPPLY VALVE

The RSV-1 is a modular control valve that allows a diver to switch breathing gas supplies in less than a second.

The RSV-1 is particularly useful to a Public Safety Diver utilizing a full-face mask. 

The RSV-1  allows the diver to switch to their alternate air supply without removing their mask (a valuable feature when diving in toxic or hazardous locations).

The RSV-1 allows divers the ability to assist a entangled diver by being able to pass off a spare tank or connect a surface gas supply to the RSV-1. 

With the white button down and the safety clip installed, the RSV-1 is routing the breathing gas through the threaded fitting which is the Primary gas supply.

Release the safety clip and press the button on the bottom of the RSV-1 and the RSV-1 is routing the breathing gas through the quick disconnect fitting and you are on your alternate supply

(which is indicated by the brightly colored band at the top of the RSV-1 shuttle.

With only one moving part, maintenance is easy. Simply freshwater rinse the RSV-1 along with your other dive gear.  

Dry the RSV-1 and remove only one screw in order to disassemble and grease the "O"-rings.

The RSV-1 is made from Delrin (a high tech engineering plastic from DuPont).

The fittings are made from stainless and all "O"-rings are Viton.

The three connection ports are identical, which allows the RSV-1 to be configured to suit the dive mission. 

RSV-1 adapters and configurations currently available for: Interspiro AGA mask, OTS Guardian, EXOxmask, and most standard regulators with a 9/16-18 thread.

Quick disconnect fittings include: AGA, Seaquest Air Source, and Scuba ProAir 2 fittings.

Harness mount and customized fittings are available. The RSV-1 is intended for use by Public Safety, Military, Technical and Commercial Divers. 

 

Price$545.00
SBV-1
1 of 3
SBV-1

The SBV-1 allows a diver to breathe air directly into the Oral/Nasal Cavity of a full-face mask without the risk of CO2 buildup.

The SBV-1 design allows divers to stand fully operational on the surface without reducing their gas supply.

The SBV-1 is available for most full-face masks. The low profile of the SBV-1 reduces the chance of an entanglement. 

 

The SBV-1 is designed for divers utilizing a full-face mask. It is perfect for public safety divers that dress en route to a call.

A diver can arrive fully dressed, mask on, ready to enter the water.

Backup and 90% divers can maintain a ready position with the mask on, instead of placing the mask on only in the event of an emergency.

This reduces the possibility of a backup diver rushing, placing the mask on improperly and not maintaining a seal, wasting precious time during potential life-or-death situation.

For instructors, the SBV-1 saves time and energy by allowing them to talk through the SBV-1 and not having to remove their mask. 

There is only one moving part. Simply freshwater rinse the SBV-1 along with the full-face mask. Periodically grease the "O" rings, and you're done!

To place the SBV-1 on an AGA full-face mask, simply remove the communications port cover by removing the two screws that attach the cover.

Replace the cover with the SBV-1 and tighten the two screws.

The SBV is available for AGA, Ocean Reef and EXO full-face masks.

The SBV-1 can be fitted with your communications microphone and because the SBV-1 center section is the same for all masks.

The SBV-1 with the communications connection can be used on different masks without the need to buy a dedicated comm system for every mask.

Price$355.00
LED440000VW
1 of 2
LED440000VW

LED44000VW is a 44,000 lumen, 6500 degree K, 120 degree beam angle, Video and Photography light, with a wetmate connector. The LED44000 uses the highest output LEDs available. The LED44000 is comparable to a 3000 watt halogen system. The LED44000 has an extremely even lighting pattern that reproduces color and contrast beautifully. Can be powered with NIMH, Lithium Ion batteries or a surface supply. Depth rated to 1000' .Comes with 1/4-20 mounting base. 

Price$1,750.00
24Vac to 12Vdc power converter
24Vac to 12Vdc power converter
24 Vac -to-12 Vdc converter (use to convert HVAC system’s 24 Vac power supply to 12 Vdc)
Price$35.00
SA120
SA120

The Sartek SafeAire Model SA120 comes with a Universal Voltage wall plug in power supply and a mobile 12vdc adapter

The SA120 has two speeds, High 120cfm for daytime use and a Low 60cfm for ultra-quiet nightime use.

The SA120 uses less than 12 watts in high mode and less than 6 watts in low mode.

The SA120 filter can be removed,  cleaned and reinstalled in minutes. The SA120 filter is reuseable for years without the need for replacement.

This product, like all Sartek products, is warranteed against material and workmanship defects for as long as you own it.

U.S. Patent Pending Number 17352840

Price$175.00
Our Products
Shopping cart
 Shopping cart
0 Product(s) in cart
Total $0.00
Your account
 Login Status
Not logged in
Newsletter
Our services

credit cards